top of page

WPCT - wrap around heat shrink sleeve designed to be used on buried or offshore pipelines that will operate at ambient temperatures

  • Millions of WPCT shrink sleeves are currently installed and preventing corrosion on pipelines all around the world.

  • Stocked in 11", 17", 24" and 34" widths

  • Backing changes permanently with proper installation.

  • Shipped as a /UNI sleeve which means the closure strip is pre-attached to the sleeve, this makes installation much simpler.

  • Click HERE for Data, Installation, MSDS and Installation Video

DIRAX - heat shrink sleeve specifically designed for road bore and directional drilling applications

  • Fiber reinforced for superior abrasion and penetration resistance; the toughest shrink sleeve ever made.

  • Installed over Covalence S1301M liquid epoxy which gives it superior shear, peel and CD values.

  • Stocked in 12", 17", 24" and 34" widths

  • An incredible 10 layer coating system on the leading edge of the shrink sleeve.

  • Click HERE for Data, Installation, MSDS and Installation Video

TPS - tubular pipe sleeve for ambient temperature lines)

  • Supplied in the form of a tube (as opposed to being a 'wrap around'

  • Stocked for pipe OD 2" thru 8"

  • Available in 9" or 18" long shrink sleeves.

  • Backing has Permanent Change Indicator which serves as a built in inspection tool

  • Click HERE for documents.

WPC100M - wrap around heat shrink sleeve designed for pipelines operating at elevated temperatures

  • Aggressive mastic coated shrink sleeve that bonds to all commonly used factory applied pipe coatings (including polypropylene), with very good soil resistance.

  • Simple and easily repeatable installation process.

  • Grit blasting not required with this product.

  • ​Stocked in 11", 17", 24" and 34" widths (also available in roll form).

  • Click HERE for Data, Installation, MSDS and Installation Video

WPC120 - heat shrink sleeve for high temp (120C/251F)

  • High performance hot melt adhesive shrink sleeve rated for use at 120C / 251F

  • Permanent change indicator serves as built in inspection tool

  • Compatible with most factory applied pipe coatings (but NOT polypropylene)

  • Stocked in 11", 17", 24", 34" widths

  • Click HERE for Data and Installation

Caseal - wrap around shrink sleeve for sealing between casing and carrier

  • Fiber reinforced backing provides superior penetration resistance

  • High shrink sleeve able to bridge nearly any casing / carrier OD difference

  • Aggressive mastic sealant bonds to any factory applied coating

  • Click HERE for Data, Installation and Video

Flangeseal - wrap around shrink sleeve for sealing flanges

  • Fiber reinforced backing provides superior penetration and abrasion resistance

  • High shrink ratio so shrink sleeve is able to span large differences in flange OD and pipe OD (sleeve shrinks ~66%)

  • Can be installed so that the flange is "re-enterable"

  • Click HERE for Data and Installation

HTLP60 - three layer polyethylene field joint coating rated to 60C / 140F

  • Recreates a three layer polytheylene coating on the field joints

  • Rated for use on pipelines operating at up to 60C / 140F

  • Installed over S1301M liquid epoxy for higher shear and peel values

  • Permanent change indicator in backing of the shrink sleeve, which serves as built-in inspection tool

  • Click HERE for Data, Installation and  Video

WPC65M - mastic, wrap around shrink sleeve designed for use on pipelines operating at up to 65C

  • Minimal surface preparation required for this shrink sleeve

  • Built in inspection tool in Permanent Change Indicator

  • Standard widths are 11", 17", 24" and 34"

  • Click HERE for Data and Installation

HTLP80 - three layer sleeve system designed to be used on pipelines operating at up to 80C

  • Three layer shrink sleeve system incorporating liquid epoxy, high shear adhesive and PE backing

  • Installed over S1301M liquid epoxy

  • Available in 11", 17", 24" and 34" widths

  • Click HERE for Data and Installation

Flexclad - heat shrinkable tape

  • Available in 2", 3" and 4" widths

  • Rolls are 50 feet long

  • Can be used on a multitude of different substrate configurations

  • Click HERE for data and installation

PERP - polyethylene repair patch and melt stick

  • Sold as a roll so that custom patches can be cut in the field

  • Available in 60C and 80C versions

  • Perp Melt Stick is used to repair pinhole type damage

  • Click HERE to see Data and Installation

TWDB - thermofit wrap around duct band

  • Stocked in 3" and 4" widths (2" available upon request)

  • Sold as a roll (165 feet long) which offers tremendous flexibility on the job.

  • Box is supplied with a means of measuring to proper cut length

  • Click HERE for data and installation

Anode Cap - molded part to seal an anode / lead wire connection

  • Stocked in 2", 3" and 4"

  • Coated with a mastic sealant

  • Easily installed with a propane torch or heat gun

  • Click HERE to see data sheet

WCSM - medium wall tubing for wire splicing

  • Easy to install with an open flame torch or a heat gun

  • Available in numerous sizes for any wire

  • 3:1 shrink ratio

  • Click HERE for Data and Installation

IPEC - insulated pipe end cap

  • Installed on insulated lines to prevent water damage to the insulation

  • High expansion in order to bridge numerous different jacket/pipe dimensions

  • Used with a high temperature, highly aggressive mastic in order to be certain proper bond and seal is achieved

  • Click HERE for Data sheet

ASE - wire splicing

  • Used to seal a connection where three wires come together

  • Thick adhesive layer is able to fill that complicated connection

  • Rail and channel product

  • Click HERE for Data and Installation

Please reload

bottom of page